Stress distribution analysis by static force using SolidWorks – Introduction

In engineering disciplines, stress and strain analysis is a method to determine the stresses and strains in material or structures under specific force. As we now in physics study, “stress” is physical quantity that express internal forces that neighboring particles of a continuous material exert on each other. You can imagine “stress” as intensity of force per unit area.


Above image is simple representation of cubical object that force is imposed to it, and stress is generated inside the object (shown using free body diagram, red arrows shows the internal forces, which per unit area is defined by stress).

We all know that was simple enough, since the object is simple, so the calculation is off course also simple. But in reality, the object could be non symmetrical, or even irregular shape. For example, a car engine block, car body, motorcycle frame, etc. Not only the shape of the object, also if the force exerted is complex, the calculation also become complex. This would be troublesome to calculate.

The possible way to calculate the stress over irregular shape or complex forces is to make simplification of the shape or the force. For example, you can make simple discrete objects (example : cube shape, prism shape, or spherical shape) to divide the complex object. Then, the calculation is made over that “simple discrete object” one by one, connecting the resulting force and stress so that it will represent the actual stress over the object. See below picture for easy imagine.

Finite Element Analysis using SolidWorks

You can see that the “whole object” is divided into smaller part in prism shape which i called “simple discrete object”. This method is called “Finite Element Analysis (FEA)” in engineering world. If the small discrete object just a few, then manual calculation using hand and calculator is possible, but is realistic case, the small discrete object must be made so much so that the error is reduced and the result almost represent the actual stress. That is why computer aided design is very useful in engineering world.

Now lets talk about this method on SolidWorks. SolidWorks is one of popular CAD software among engineers. It has a lot of features, drawing 3D object, sketching 2D drawing, assembling parts, motion simulation of assembly object, and even fluid flow analysis, and stress and strain analysis, etc. Now we will only talk about stress and strain analysis. In this post, i made the title as stress distribution analysis by static forces. Yes, static. Since there is term static, there is also term dynamic forces. The difference is simply explained by below picture :

                                          static force                                                dynamic force

Picture on the left shows standing person holding books in his hands. This is represented as static force (since the book is in motionless, the load acting on the man hands is constant). Picture on the right shows walking person while holding books in his hands. This is represented as dynamic force (since the book is in motion, the load acting on the man hands is changing, or in the other word, not constant).

Now, you have the idea of how static force is. That idea will be implemented on object, and we will now use SolidWorks to assess the stress and strain phenomenon.

In SolidWorks, we called this analysis as “Linear Stress Analysis”, since the force acting on the object is static force. Linear stress analysis calculate the stresses and deformations of geometry given three basic assumption :

  1. The part or assembly under load are deforms with small rotations and displacements
  2. The product loading is static (ignores inertia) and constant over time
  3. The material has constant stress strain relationship (Hooke’s Law)

As i explained earlier, SolidWorks simulation also uses Finite Element Analysis (FEA) to discretize component into smaller object, then uses linear stress analysis to determine the response of parts and assemblies due to the effect of :

  1. Forces
  2. Pressures
  3. Accelerations
  4. Temperatures
  5. Contact between components

The special part using SolidWorks is that, this load can be imported from thermal, flow, and motion simulation studies to perform multiphysics analysis.

At first, before you start doing linear stress analysis on SolidWorks, you must prepare the component material data. The pros using SolidWorks, is that it contain various material database which you can apply on your design component. The database is also easily customizable to include your particular material requirements.

This is the example, result of linear static analysis using SolidWorks :

linear stress analysis result example
Source :

If you are interested more in this topic, wait for my next post, i will make step by step tutorial on how to draw, create part, and doing linear stress analysis using SolidWorks.

Thanks, have a great day 😉

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s